YSI IQ SensorNet 2020 XT Terminal - Manual (Page 152)

Settings/setup System 2020 XT USB
5 - 32 ba76019e01 12/2012
5.10.3 Alarm output to display
When an alarm event occurs, a window with a text message appears.
Fig. 5-18 Example of an alarm message on the display
The alarm message contains the following information:
Operating instructions If there are several alarm messages indicated on the display, you can
scroll through the messages with <
>. This can be recognized
from the page number in the right lower corner. The latest message is
always on the first position.
Pressing hides the alarm messages and switches to the
measured value display. After one minute the alarm messages appear
again if what caused them is still present.
 Line 1: Alarm no. Axx and time and date of the alarm event
 Line 2:
User-defined designation
 Line 3: Sensor number and model name of the sensor that
triggered the alarm event
 Line 4: Series number and name of the sensor that triggered the
alarm event
 Line 5: Description of the event with specification of the limiting
value:
"<" = undercut
">" = exceeded