YSI IQ SensorNet 2020 XT Terminal - Manual (Page 133)

System 2020 XT USB Settings/setup
5 - 13 ba76019e01 12/2012
5.5.2 Changing the display position
The numbering of the sensors is generated by the system. The order of
the sensors in the measured value display and in the Edit list of sensors
overview can be individually determined.
Fig. 5-6 Edit list of sensors -> Set display position
1 Using , open the Settings menu.
2 Using <
> and , select and confirm the menu
item, System settings -> Edit list of sensors.
The Edit list of sensors display opens.
3 Using <
>, highlight the Model column. Confirm with
.
4 Press <
> to highlight a Model and confirm with .
A dialog window opens.
5 Using <
>, select the menu item, Set display position
and confirm with . A dialog window opens.
6 Press < > to select the required number for the display
position and confirm with .
The sensor is displayed at the new position in the list of
sensors. The other sensors are moved accordingly.