GE Industrial Solutions Millennium II Controller J85501P-1 - Manual (Page 101)

Basic Installation and User’s Guide for the Millennium II Controller
Issue 3 January 2008 101
Enabled if Millennium was 1
Disabled if Millennium was 0
SW203-5 Full Access through
Aux Port
Using the front panel, go to:
MenuÆConfigÆComm PortsÆAux Port
Config Write to:
Enabled if Millennium was 1
Disabled if Millennium was 0
SW203-4 Full Access through
Modem Port
Using the front panel, go to:
MenuÆConfigÆComm PortsÆModem
Port
Config Write to:
Enabled if Millennium was 1
Disabled if Millennium was 0
SW203-3 Modem/Local/Aux
Setting Config
Set SW202-7 to:
0 if Millennium was 0
1 if Millennium was 1
SW203-2 Local Port(Event
Log or Terminal)
Using the front panel, go to:
MenuÆConfigÆComm PortsÆLocal Port
Config Application to:
Event Log if Millennium was 1
Terminal if Millennium was 0
SW203-1 Aux Port(RS232 or
RS485) Set SW202-5 to:
0 if Millennium was 0
1 if Millennium was 1
SW204(4-8) NOT USED Not Applicable to Millennium II
SW204-3 Enhanced Remote
Security
Set SW202-6 to:
0 if Millennium was 0
1 if Millennium was 1
SW204-2 Remote Alarm Test Not Used
SW204-1 Rectifier Energy
Management
Using the front panel, go to:
MenuÆConfigÆPlant
Config Efficiency to:
Enabled if Millennium was 1
Disabled if Millennium was 0