GE Industrial Solutions Entellisys 4.0 Integrator's Guide - Manual (Page 111)

111
3 DCC6 Reserved (12 items) --- --- --- F001 0
DCD2 ST Overcurrent Flex Operand States (6 items) 0 to 65535 --- 1 F500 0
DCD8 Summation MSGF Zone Flex Operand States 0 to 65535 --- 1 F500 0
DCD9 Synch Check Flex Operand States (8 items) 0 to 65535 --- 1 F500 0
DCE1 Under Frequency Flex Operand States (12
items) 0 to 65535 --- 1 F500 0
DCED Under Voltage Flex Operand States (12
items) 0 to 65535 --- 1 F500 0
DCF9 Reserved (7 items) --- --- --- F001 0
Source Setting Groups (Read/Write Setting) (30 modules)
E1FF SRC X IOC Enabled (16 items) 0 to 1 --- 1 F718 1 (Enabled)
E20F SRC X IOC Pickup Setting Multiplier (16 items) 1.5 to 15 --- 0.5 F001 60
E21F SRC X Short Time Protection Switch (16
items) 0 to 1 --- 1 F102 1 (Enabled)
E22F SRC X Short Time Pickup Setting (16 items) 1.5 to 9 --- 0.5 F001 40
E23F SRC X Short Time I2T Curve (16 items) 0 to 1 --- 1 F102 0 (Disabled)
E24F SRC X Short Time Delay Band Setting (16
items) 0 to 6 --- 1 F713 2 (BAND 3)
E25F SRC X Long Time Delay Band Setting (16
items) 0 to 3 --- 1 F711 1 (BAND 2)
E26F SRC X GF Protection Switch (16 items) 0 to 1 --- 1 F102 0 (Disabled)
E27F SRC X GF Protection Trip Pickup Setting (16
items) 0.2 to 0.6 --- 0.01 F001 24
E28F SRC X GF Protection Trip I2T Curve (16 items) 0 to 1 --- 1 F102 1 (Enabled)
E29F SRC X GF Protection Trip Delay Band Setting
(16 items) 0 to 6 --- 1 F713 2 (BAND 3)
E2AF SRC X GF Protection Trip Priority (16 items) 0 to 30 --- 1 F001 0
E2BF SRC X GF Protection Alarm Enable (16 items) 0 to 1 --- 1 F102 0 (Disabled)
E2CF SRC X GF Protection Alarm Pickup Setting
(16 items) 0.2 to 0.6 --- 0.01 F001 24
E2DF SRC X GF Protection Alarm I2T Curve (16
items) 0 to 1 --- 1 F102 1 (Enabled)
E2EF SRC X GF Protection Alarm Delay Band Set-
ting (16 items) 0 to 6 --- 1 F713 2 (BAND 3)
E2FF ...Repeated for module number 2