GE Industrial Solutions AF-600 FP Profibus DP - Manual (Page 78)

If Logic OR [3] is selected, activation of one signal will activate the function.
Logic OR [3]
Terminal
Bit 02/03/04 Function
0 0 Coast/DC brake/Q-Stop
0 1 Coast/DC brake/Q-Stop
1 0 Coast/DC brake/Q-Stop
1 1 No Coast/DC brake/Q-Stop
The effect of control mode upon the function of par. O-53 Start Select and par. O-54 Reversing Select:
If Digital input [0] is selected, the terminals will control the start and reversing
functions
Digital input [0]
Terminal
Bit 06/15 Function
0 0 Stop/Anti-clockwise
0 1 Stop/Anti-clockwise
1 0 Start/Clockwise
1 1 Start/Clockwise
If Serial communication [1] is selected, commands will be activated only when
given via serial communication.
Serial communication [1]
Terminal
Bit 02/03/04 Function
0 0 Stop/Anti-clockwise
0 1 Start/Clockwise
1 0 Stop/Anti-clockwise
1 1 Start/Clockwise
If Logic AND [2] is selected, both signals must be activated to perform the
function.
Logic AND [2]
Terminal
Bit 02/03/04 Function
0 0 Stop/Anti-clockwise
0 1 Stop/Anti-clockwise
1 0 Stop/Anti-clockwise
1 1 Start/Clockwise
If Logic OR [3] is selected, activation of one signal will activate the function.
Logic OR [3]
Terminal
Bit 02/03/04 Function
0 0 Stop/Anti-clockwise
0 1 Start/Clockwise
1 0 Start/Clockwise
1 1 Start/Clockwise
The effect of control mode upon the function of par. O-55 Set-up Select and par. O-56 Preset Reference Select:
If Digital input [0] is selected, the terminals will control the set-up and preset
reference functions.
Digital input [0]
Terminal
Bit 00/01, 13/14 Function
Msb Lsb Msb Lsb Preset ref., Set-up no.
0 0 0 0 1
0 0 0 1 1
0 0 1 0 1
0 0 1 1 1
0 1 0 0 2
0 1 0 1 2
0 1 1 0 2
0 1 1 1 2
1 0 0 0 3
1 0 0 1 3
1 0 1 0 3
1 0 1 1 3
1 1 0 0 4
1 1 0 1 4
1 1 1 0 4
1 1 1 1 4
AF-650 GP/AF-600 FP Profibus DP Operating Instructions
77
8