GE Industrial Solutions AF-600 FP Profibus DP - Manual (Page 15)

2.2 How to Install the Profibus DP Communications Module in Drive
To install the module in the drive you will need:
- The Profibus DP Communications Module (OPCPDP)
- Network option adaptor frame for the AF-6 Series drives.. This frame is deeper than the standard frame, to allow space for the network option beneath
- Cable holders
Instructions:
- Remove the keypad from the frequency converter
- Remove the frame located beneath and discard
- Push the module into place. Two positions are possible, with cable terminal facing either up or down. The cable up position is often most suitable when
several frequency converters are installed side by side in a rack, as this position permits shorter cable lengths
- Push the network option adaptor frame into place
- Replace the keypad. - Attach cable
- Fasten the cable in place using cable holders
- The AF-6 Series Drives top surfaces have pre-bored threaded holes for attaching the cable holders to the unit
AF-650 GP/AF-600 FP Profibus DP Operating Instructions
14
2