Rainbow Electronics ATmega8515L - Manual (Page 64)

64
ATmega8515(L)
2512A–AVR–04/02
Alternate Functions Of Port B The Port B pins with alternate functions are shown in Table 29.
The alternate pin configuration is as follows:
• SCK – Port B, Bit 7
SCK: Master Clock output, Slave Clock input pin for SPI channel. When the SPI is
enabled as a Slave, this pin is configured as an input regardless of the setting of DDB7.
When the SPI is enabled as a Master, the data direction of this pin is controlled by
DDB7. When the pin is forced by the SPI to be an input, the pull-up can still be con-
trolled by the PORTB7 bit.
• MISO – Port B, Bit 6
MISO: Master Data input, Slave Data output pin for SPI channel. When the SPI is
enabled as a Master, this pin is configured as an input regardless of the setting of
DDB6. When the SPI is enabled as a Slave, the data direction of this pin is controlled by
Table 28. Overriding Signals for Alternate Functions in PA3..PA0
Signal
Name
PA3/AD3 PA2/AD2 PA1/AD1 PA0/AD0
PUOE SRE SRE SRE SRE
PUOV ~(WR | ADA) •
PortA3 ~(WR | ADA) •
PortA2 ~(WR | ADA) •
PortA1 ~(WR | ADA) •
PortA0
DDOE SRE SRE SRE SRE
DDOV WR | ADA WR | ADA WR | ADA WR | ADA
PVOE SRE SRE SRE SRE
PVOV A3 • ADA |
D3 OUTPUT •
WR
A2 • ADA |
D2 OUTPUT •
WR
A1 • ADA |
D1 OUTPUT •
WR
A0 • ADA |
D0 OUTPUT •
WR
DIEOE 0 0 0 0
DIEOV 0 0 0 0
DI D3 INPUT D2 INPUT D1 INPUT D0 INPUT
AIO – – – –
Table 29. Port B Pins Alternate Functions
Port Pin Alternate Functions
PB7 SCK (SPI Bus Serial Clock)
PB6 MISO (SPI Bus Master Input/Slave Output)
PB5 MOSI (SPI Bus Master Output/Slave Input)
PB4 SS (SPI Slave Select Input)
PB3 AIN1 (Analog Comparator Negative Input)
PB2 AIN0 (Analog Comparator Positive Input)
PB1 T1 (Timer/Counter1 External Counter Input)
PB0
T0 (Timer/Counter0 External Counter Input)
OC0 (Timer/Counter0 Output Compare Match Output)