Table 3, Atmega8515(l) – Rainbow Electronics ATmega8515L User Manual
Page 28
28
ATmega8515(L)
2512A–AVR–04/02
SRAM address space is configured as one sector, the wait states are configured by the
SRW11 and SRW10 bits.
• Bit 1 and Bit 6 MCUCR – SRW11, SRW10: Wait State Select Bits for Upper
Sector
The SRW11 and SRW10 bits control the number of wait states for the upper sector of
the External Memory address space, see Table 3.
• Bit 3..2 – SRW01, SRW00: Wait State Select Bits for Lower Sector
The SRW01 and SRW00 bits control the number of wait states for the lower sector of
the External Memory address space, see Table 3.
Note:
1. n = 0 or 1 (lower/upper sector).
For further details of the timing and wait states of the External Memory Interface, see
Figure 13 to Figure 16 how the setting of the SRW bits affects the timing.
Table 2. Sector Limits with Different Settings of SRL2..0
SRL2
SRL1
SRL0
Sector Limits
0
0
0
Lower sector = N/A
Upper sector = 0x0260 - 0xFFFF
0
0
1
Lower sector = 0x0260 - 0x1FFF
Upper sector = 0x2000 - 0xFFFF
0
1
0
Lower sector = 0x0260 - 0x3FFF
Upper sector = 0x4000 - 0xFFFF
0
1
1
Lower sector = 0x0260 - 0x5FFF
Upper sector = 0x6000 - 0xFFFF
1
0
0
Lower sector = 0x0260 - 0x7FFF
Upper sector = 0x8000 - 0xFFFF
1
0
1
Lower sector = 0x0260 - 0x9FFF
Upper sector = 0xA000 - 0xFFFF
1
1
0
Lower sector = 0x0260 - 0xBFFF
Upper sector = 0xC000 - 0xFFFF
1
1
1
Lower sector = 0x0260 - 0xDFFF
Upper sector = 0xE000 - 0xFFFF
Table 3. Wait States
SRWn1
SRWn0
Wait States
0
0
No wait states.
0
1
Wait one cycle during read/write strobe.
1
0
Wait two cycles during read/write strobe.
1
1
Wait two cycles during read/write and wait one cycle before driving out
new address.