EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual - Manual (Page 97)

Open Save Clip Window
If this checkbox is NOT selected, the clip will be made instantly when a new clip is
created in the Control Panel. The clip is stored in the next available location on the page
designated for IPDirector clips in the EVS server setup (default setting is page 6).
If this checkbox is selected, the Save Clip window will open when a new clip is created in
the Control Panel. The user can enter data on the clip in this window. See
the Control
Panel user manual .
Guardbands
The guardbands correspond to A/V material which is added on both sides of the clip
boundaries when the clip is created. They are defined in seconds in this setting field.
When a new clip is saved, the guardbands will automatically be added before the IN point
of the clip and after the OUT point of the clip.
Default Clip Duration
The Default Clip Duration setting makes it possible to create a new clip with the default
duration specified in this setting when only the IN point or the OUT point has been defined
and the NEW CLIP button is clicked.
Create Clips on all Synchronized Recorders
When this setting is selected, clips will automatically be created on all recorders ganged
to the recorder on which the user creates a clip.
The clip that the user has created will have the extension 00 after the name and the clips
created on the ganged recorders will have extension 01, 02, etc. depending on the number
of ganged recorders.
Create Sub Clips on all Ganged Clips
If this setting is selected, when a user creates a sub-clip from one linked clip, sub-clips
will automatically be created from all the clips linked to that clip.
If this setting is not checked, a sub-clip will only be created on the selected clip.
Trim all Ganged Clips
If this setting is selected, when a user trims a linked clip, all the clips linked to that clip will
automatically be trimmed.
If this setting is not checked, only the selected clip will be trimmed.
IPDirector - Version 6.2 - User Manual - General Functions
6. Settings 85