EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual - Manual (Page 132)

and the Function button LED turns red (recorder) or green (player) in the Remote Control
Manager and on the remote:
How to Assign Player or Recorder Channels to Function Buttons
from the Channel Explorer
To assign a recorder channel or a player channel to a Function button of the BEPlay
Remote by a drag-and-drop operation from the Channel Explorer, proceed as follows:
1. Open the Channel Explorer.
2. Select the channel and drag it to one of the six Function button / Channel Name field
areas in the Remote Control Manager window.
The channel name is displayed in the Channel Name field:
and the Function button LED turns red (recorder) or green (player) in the Remote
Control Manager and on the remote:
Note
If you do not have the user right to control the channel, the channel name is
displayed but the Function button LED is dimmed.
3. If needed, repeat step 2 for the other Function buttons.
Linked Channels
In case the channel is linked to another one in a PGM/PRV mode, gang mode or Fill and
Key mode, the linked channels are listed in the Linked Channels box.
120 8. Remote Control Management
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A