EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual - Manual (Page 153)

10.3. On-Screen Display
10.3.1. Configuration and Activation
The information to display on a monitor is set in the OSD Settings window. It is defined for
each playout channel. This does not apply to recorder channels or software player. See
section "OSD Settings" on page 93.
The OSD can be turned ON or OFF in several ways:
• By using a shortcut in the various IPDirector applications: Control Panel Playlist
Panel, AB Roll Playlist Panel, IPEdit, IPLogger, Database Explorer. See sections
"Channel Management Shortcuts" on page 101 and "Channel Management Shortcuts"
on page 101.
• By using a shortcut on the ShuttlePRO. See section "ShuttlePRO Configuration" on
page 128.
• By selecting an option in the Channel Explorer.
10.3.2. Impacted Channels
Depending on the channel mode the player channel is involved into, the effect of the Turn
OSD ON or OFF shortcut will differ as detailed in the table below.
If the channel
mode is…
…the OSD appears / disappears for…
PGM the player channel linked to the device or active panel from which
the shortcut has been applied
PGM/PRV • In Clip mode (clip, growing clip, train loaded):
the player channel linked to the device or active panel from
which the shortcut has been applied
• In Playlist mode (playlist loaded):
both player channels engaged in PGM/PRV mode
Fill & Key the player channel linked to the device or active panel from which
the shortcut has been applied
Ganged the player channel linked to the device or active panel from which
the shortcut has been applied
IPEdit (Timeline
mode) the player channel associated to the panel which is active in
IPEdit: Player or Timeline
AB Roll all the player channels associated to the AB Roll Panel
IPDirector - Version 6.2 - User Manual - General Functions
10. Display Tools 141