beautypg.com

Selecting a player to control, Selecting a player channel to control, Controlling the software player – EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual User Manual

Page 134

background image

2. Use the remote wheel to move through the list of EVS servers.

3. Press the ENTER button of the remote to select one of the EVS servers.

Note: To cancel the operation: press MENU.

The server recorder channels are assigned to the first Function buttons and the
corresponding LED are red. The server player channels are assigned to the next buttons
and the corresponding LED are green.

In case the EVS server has less than 6 channels, the exceeding buttons are not assigned.

When it has more than 6 channels, recorder channels are assigned first and the player
channels are assigned until no more Function button is available.

8.4.6.

Selecting a Player to Control

A player channel or the Software Player can be controlled by the remote.

Selecting a Player Channel to Control

To select one of the player channels, press the Function button which has been
associated to it in Favorite mode or in Normal mode, as described in section "Assigning
Channels to Function Buttons" on page 119
.

The LED of the Function button flashes green.

If the player channel is already associated to a Control Panel or a Playlist Panel, the
BEPlay remote icon appears in the Player field of this panel:

It is also displayed in the Channel Explorer, next to the controlled player.

In Timeline mode, two players are associated to form the Timeline Engine. They can be
PGM1/PGM2 or PGM3/PGM4. Pressing the Function button assigned to the odd player
gives access to the IPEdit Timeline pane. Pressing the Function button assigned to the
even player gives access to the IPEdit Player pane.

Controlling the Software Player

Favorite Mode

If you work with the player and recorders which have been selected in the Remote Control
Manager window, you can take the control of the Software Player with the BEPlay remote
in one of the following ways:

Press the Function button which has been assigned the Software Player in the
Remote Control Manager window.

Press SHIFT, F1 on the Remote, would the Software Player be associated to a
Function button or not.

122

8. Remote Control Management

EVS Broadcast Equipment S.A. - June 2013

Issue 6.2.A