EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual - Manual (Page 101)

• from Output GPIs to Input GPIs: a message will warn the user that the TTL GPIs may
be used as Output GPIs in playlist, playlist macro command or timeline macro
command.
In the Output GPIs Settings window, changing the TTL configuration will result in the
following behaviors:
• from Output GPIs to Input GPIs: the configuration of the last 4 Output GPIs is cleared.
• from Input GPIs to Output GPIs: a message will warn the user that the TTL GPIs may
be used as Input GPIs in playlist, playlist macro command or timeline macro
command.
6.5.4. Input GPIs Settings
The Input GPIs settings make it possible to configure the action to be triggered on a given
player channel of the EVS server when a given key is pressed on a GPI device connected
to this EVS server.
IPDirector - Version 6.2 - User Manual - General Functions
6. Settings 89