EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual - Manual (Page 119)

Note
If the Apply function to all channels checkbox had previously been selected,
when the operator assigns a function to a button, it is assigned to all the
corresponding buttons for the player channels controlled by the remote. This
modification is done on the selected tab only, not on all the connected MPlay
devices.
8.3.3. How to Use the MPlay Remote
When you have assigned a player channel to the MPlay Remote and configured its
buttons, you can use the device to perform actions on that channel.
1. Associate the same player channel to an IPDirector module such as Control Panel,
Playlist Panel, Database Explorer or AB Roll Playlist interface. You can assign it to
several windows at the same time.
2. On the MPlay Remote, press the button corresponding to the action you want to
apply.
The action is performed on the panel or window which is active at the moment you press
the button.
8.4. BEPlay Remote
8.4.1. Introduction
The BEPlay remote is a remote controller for browsing, editing and playing content.
It can be configured to control selected channels and to send media to predefined
destinations.
The first sections of the current chapter are dedicated to the configuration and the
description of the various buttons.
The next sections provide procedures on the main functionalities which can be performed
with the remote.
IPDirector - Version 6.2 - User Manual - General Functions
8. Remote Control Management 107