EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual - Manual (Page 86)

5.5.4. Assigning a Keyword from a Keyword Tool
How to (Un)Assign a Keyword to Media from a
Keyword Grid or Dictionary
You can choose to add keywords from a keyword grid or from a dictionary. When the
media is being created or edited and the corresponding window (create or edit) is opened.
The Edit mode must be inactive.
To do so proceed as follows:
1. Open the relevant keyword grid or the relevant dictionary.
The Apply button of the keyword grid should be enabled.
Otherwise, click the New/Edit window again.
2. Click the keyword.
It is added to the media window and it is highlighted in the keyword grid
or dictionary
3. To remove a keyword, click it again in the keyword grid or dictionary.
It is removed from the media window.
How to (Un)Assign a Keyword using the Keyword
Number from a Keyword Grid
When you work with the Keyword Grid tool, you can assign keywords using the keyword
numbers associated with each keyword of the grid. They allow a fast selection of the
keyword.
To assign a keyword to a log or clip using the keyword number, proceed as follows:
1. Open the relevant keyword grid and select View > Keyword Numbers to view the
numbers associated to each keyword.
2. Open the Create/Edit Log, Create/Edit Playlist or New/Edit Clip window of the media
in IPDirector.
The Apply button should become available in the keyword grid.
3. Click again in the keyword grid (the keyword grid window must be active instead of the
other window).
4. On the keyword numeric pad, type the keyword number corresponding to the
requested keyword and press +.
The keyword is added to the Create or Edit window.
74 5. Keyword Management
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A