EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual - Manual (Page 116)

Several MPlay remote devices can be connected. In this case, as many tabs are
displayed as they are devices. One of the devices is defined as Master, the other ones as
slaves. This is done in the Remote Installer. Refer to the Technical Reference manual.
You will be able to control up to four player channels with one device.
Assigning Player Channels
How to Assign Player Channels from the Channel Name Contextual
Menu
To assign a player channel to the MPlay Remote from the Channel Name field of the
Remote Control Manager window, proceed as follows:
1. In the Remote Control Manager window, right-click one of the Channel Name field. A
contextual menu is displayed:
2. Select a player channel.
3. Repeat steps 1 and 2 for all the channels you want to associate to the buttons.
The channel name is displayed in the Channel Name field.
How to Assign Player or Recorder Channels to Function Buttons
from the Channel Explorer
To assign player channels to the MPlay Remote by a drag-and-drop operation from the
Channel Explorer, proceed as follows:
1. Open the Channel Explorer.
2. Select the player channel and drag it to one of the fourChannel Name field areas in
the Remote Control Manager window.
104 8. Remote Control Management
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A