EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual - Manual (Page 140)

9. ShuttlePRO Configuration
9.1. Introduction
ShuttlePRO has a Jog wheel, a Shuttle ring, and fifteen buttons. The two top rows of
buttons on the ShuttlePRO have labels for quick reference as to which function each
button is designed to perform.
Since version 4 of IPDirector, the ShuttlePRO driver is no more needed. IPDirector
accesses directly to this device. The button configuration is now hard coded.
9.2. Button Configuration
The controller has different functions depending on which mode the IPDirector is being
operated in. The long buttons on the lower part of the controller have a different function at
either end. Other buttons have CTRL or SHIFT from the keyboard as a modifier to
change the button function. These functions are shown in red for CTRL and blue for
SHIFT in the diagrams below.
The diagrams in sections "Quick Reference in Clip Mode" on page 129 and "Quick
Reference in Playlist Mode" on page 130 are quick reference guides to the location of the
functions. Details on the button functions are included in the different chapters of the
IPDirector manual.
128 9. ShuttlePRO Configuration
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A