EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual - Manual (Page 136)

2. Use the remote wheel to move through the recorder channels list.
3. Press the ENTER button of the remote to select a recorder.
Note: To cancel the operation: press MENU.
The train is loaded on the player channel or on the Software Player controlled by the
remote.
Rules for Loading a Train
Depending on the element previously loaded on the controlled player channel, the
behavior will vary as follows:
Element Previously
Loaded
Pressing the F button of a recorder…
Playlist loads the corresponding train in E/E.
Clip loads the corresponding train in E/E.
Train in Pause loads the corresponding train in pause at the same
timecode.
Train in Play loads the corresponding train in play at the same
timecode.
Train in E/E loads the corresponding train in E/E.
Loading a Clip
Possible Sources of Clips
Clips can be selected from different sources to load them on the controlled player channel:
• From the Search TC list: see section "BEPlay Remote Buttons" on page 113.
• From the Last Created Clips list: see section "BEPlay Remote Buttons" on page 113.
• From the Database Explorer grid: see section "Browsing Media with the BEPlay
Remote" on page 125.
How to Load a Linked Clip
1. Select the player to be controlled by the BEPlay remote, as described in "Selecting a
Player to Control" on page 122.
2. Press SHIFT, Last Clips on the BEPlay.
124 8. Remote Control Management
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A