EVS XEDIO CleanEdit Version 4.1 - December 2011 User Manual - Manual (Page 55)

Xedio Suite Version 4.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – December 2011
Issue 4.1.B
41
5.2.4 C
REATING A
N
EW
P
ROJECT
Procedure
You can create a new project via the New command in the Project contextual
menu. This opens the New Project dialog box in which you define and save the
project characteristics. You need to specify a project name and video standard to
be used in your project, then click OK to validate. The project characteristics are
recorded in the database.
Project Default Values
By default, the following values are used:
• Project name: Project_XXXX where XXXX corresponds to an incremented
number.
The default name can be changed in Xedio Manager, Software > Parameter
Profiles tool, in the Browser tab.
• Video Standard: at first use, the displayed default value is the one set in
Xedio Manager. Afterwards, it will correspond to the last value selected by the
user.
Project Video Standard
The video standard specifies the resolution and frequency that will be used for
playing out or rendering the project. Once a project is created, you cannot modify
the video standard.
The default value for the project video standard is set in Xedio Manager in
Software > Parameter Profiles > General > General tab: Default Video Standard
field.
In a project you cannot add media with a frequency different from the project video
standard.
But you can add media having any video standard, they will be converted to the
project video standard.