EVS XEDIO CleanEdit Version 4.1 - December 2011 User Manual - Manual (Page 29)

Xedio Suite Version 4.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – December 2011
Issue 4.1.B
15
2.8.2 M
ARKING
P
OSITION ON THE
T
IMELINE
Using the icons displayed on the screenshot below, you can mark points to edit
accurately on the timeline. You can use these marks to place your clips into the
timeline.
The following marks can be defined in the timeline:
Name Description To define the mark, …
Nowline blue vertical line, which
displays the current
position on the timeline
click on the timeline ruler where you want
to place the nowline.
Mark IN green vertical line,
which displays the
position of a mark IN
point
place the nowline at the requested position
and click the Mark IN icon .
Mark OUT red vertical line, which
displays the position of
a mark OUT point
place the nowline at the requested position
and click the Mark OUT icon
2.8.3 M
ODE TO
P
LACE THE
C
LIP ONTO THE
T
IMELINE
Before you drag a clip onto the timeline, you need to define the way you want to
insert it. Two modes are available: Overwrite or Insert.
You select the mode by clicking the Overwrite/Insert Mode icon (left icon above
the timeline display), which allows the user to toggle the mode.