Audio track selection for the output, Introduction, On ‘audio track selection for the – EVS XEDIO CleanEdit Version 4.1 - December 2011 User Manual User Manual
Page 109: Output, Ge 95
Xedio Suite Version 4.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – December 2011
Issue 4.1.B
95
Video and Audio tracks can be selected by using the following shortcuts:
Track
Activation Shortcut
Video
A1
+
A2
+
A3
+
A4
+
A5
+
All Audio
+
A
UDIO
T
RACK
S
ELECTION FOR THE
O
UTPUT
Introduction
Based on the Audio Type selected at edit creation (from the Edit Properties
window), output tracks types have been set and are displayed in the Recorder
pane.
From the timeline, an Audio Output Matrix is used to define which timeline track
will be routed to which output track. This matrix is accessed by clicking the Audio
Matrix button
, available only if the Show Audio Matrix Button parameter has
been enabled in Xedio Manager > Parameter Profiles > CleanEdit > Timeline.
In case the Audio Matrix button has not enabled, all the audio tracks are output
on the output stereo track 1.
The selection of the output track corresponding to each audio track is performed
through an audio output matrix. This matrix is accessed by clicking the Audio
Matrix button
. The Show Audio Matrix Button parameter must have been
enabled in Xedio Manager > Parameter Profiles > CleanEdit > Timeline.
In case the Audio Matrix button has not enabled, all the audio tracks are output
on the output stereo track 1.