EVS XEDIO CleanEdit Version 4.1 - December 2011 User Manual - Manual (Page 197)

Xedio Suite Version 4.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – December 2011
Issue 4.1.B
183
To copy and paste an audio effect, proceed the same way as for the video effects.
For a detailed procedure, refer to the section 8.3.6 ‘Copying and Pasting Video
Clip Effects’, on page 155.
10.4 AUDIO LEVEL ADJUSTMENTS
10.4.1 I
NTRODUCTION
In Zoom mode the level of the audio clips in the edit are also displayed. The
horizontal line on the expanded audio clip represents its audio level. The original
audio level of the source clip is referred to as the 0db level:
10.4.2 H
OW TO
A
DJUST THE
A
UDIO
L
EVEL ON A
S
INGLE
C
LIP
To adjust the audio level on a single clip, proceed as follows:
1. In Zoom mode, position the mouse on the horizontal line (audio level) of the
clip to be adjusted.
2. When the mouse pointer shows a double headed arrow, click and hold on the
left button of the mouse.
3. Move the audio level line up or down to respectively increase or decrease the
audio level of the clip:
The db increase compared to the original audio level is specified on the audio
level line as you move it.
4. Release the mouse when you have reached the requested audio level.