Editing in place, 1 overview, Overview – EVS XEDIO CleanEdit Version 4.1 - December 2011 User Manual User Manual

Page 173

Xedio Suite Version 4.1 – User’s Manual – CleanEdit

EVS Broadcast Equipment – December 2011

Issue 4.1.B

159

9. Editing in Place

9.1 OVERVIEW

The Edit in place feature allows the user to access and edit recorded A/V material

directly from a camcorder, a drive or a VTR like a Sony XDCAM, a Panasonic P2

or a CANON Compact Flash inside CleanEdit without any delay or file transfer

after connecting the device to his workstation or laptop. This feature is available

through the Devices tab of the CleanEdit work area.
The Devices tab provides automatically the list of connected devices to the

workstation. Selecting one or several devices should display their corresponding

content (clips) in a specific workspace from where the user is able to browse and

choose the desired A/V material for further editing.
The Devices tab interface consists of two areas. They are highlighted on the

following screenshot and shortly described in the table below:

Area

Description

1. Source Device This area displays the plugged-in devices and the media that

has been automatically detected on the devices, as well as

media from drives and folders which have been scanned by