3Com TR - Manual (Page 98)

6-10 C HAPTER 6: M ONITORING THE S WITCH 2000 TR
LCD Status
The LCD console located on the front panel of the
Switch 2000 TR provides useful hardware, software,
and system version information. Refer to Chapter 5
for more information.
Figure 6-9 LCD Console Status Chart
To view the LCD status, take these steps from the
Switch 2000 TR>Unit Id banner:
1 Press [Down Arrow] until Switch 2000 TR>Status>
appears.
2 Press [Enter].
STATUS>HW Version appears.
3 Press [Enter].
HW Version#: appears and displays the hardware ver-
sion of the Switch 2000 TR.
4 Press [Left Arrow] to return to the STATUS >HW Ver-
sion> display.
5 Press [Down Arrow].
STATUS >SW Version> appears.
6 Press [Enter].
SW Version #> appears and displays the Boot software
version stored on the Switch 2000 TR.
7 Press [Left Arrow] to return to STATUS > SW Version>.
8 Press [Down Arrow].
STATUS >BOOT SW Ver> appears.
9 Press [Enter].
Boot SW Ver #: displays the software version stored in the
EPROM of the Switch 2000 TR. This version number is
automatically updated when you download new software.
10 Use [Left Arrow] to scroll back up through the menus.
[Enter] [Enter] [Left Arrow]
[Down Arrow]
[Enter] [Left Arrow]
[Down Arrow]
[Enter] [Left Arrow]
> Status
Switch 2000 TR
> Status
Switch 2000 TR
STATUS
>HW Version >
STATUS
>HW Version >
STATUS
>Boot SW Ver >
HW Version #:
[R/O Version]
SW Version #:
[R/O Version]
Boot SW Ver #:
[R/O Version]