3Com TR - Manual (Page 56)

3-20 C HAPTER 3: S ETTING U P FOR M ANAGEMENT
screen locks. When the download completes, the
Switch 2000 TR automatically resets and re-boots
with the new software image.
7 In the File Name field, enter “UNIT # n”.
Where “n” specifies the unit ID of the unit from
which the download occurs. In most cases this unit
will be the head unit: Unit # 1.
This procedure downloads the software image from
“Unit # 1” to all other units in the stack
Upgrading Module Software
The ATM, FDDI, and TR-in-FE Modules have their own
software which is upgraded independently of the
Switch software. If you own one of these modules,
you will need to upgrade the software.
To perform a software upgrade for a module, follow
the steps in “Upgrading Software” above, except in
Step 3 select ATM Module, FDDI Module, or TR-in-FE
Module in the Destination field.
For more information regarding these modules, see:
■ SuperStack II Switch 2000 TR ATM OC-3 Module
User Guide (Part Number #99041)
■ SuperStack II Switch 2000 TR FDDI Module User
Guide (Part Number #99048)
■ SuperStack II Switch 2000 TR Token Ring-in-Fast
Ethernet Module User Guide (Part Number
#99045)