3Com TR - Manual (Page 72)

4-14 C HAPTER 4: C ONFIGURING WITH THE VT100 I NTERFACE
Unit Configuration
Unit configuration allows you to view these unit
parameters:
■ Unit ID
■ Unit Name
■ Port Capacity
■ Option Slot
■ Power Supply
For more information on the unit, refer to “Unit Sta-
tistics in Chapter 6.
Setting Up the Unit
1 Log on to the Switch 2000 TR.
2 Select Switch Management from the Main Menu.
3 Press [Space Bar] and select *Unit*.
4 Enter the ID of the unit you wish to set up.
5 Select SETUP. The TR Unit Setup screen appears. See
Figure 4-11.
Unit ID
The Unit ID identifies the number of the unit for pur-
poses of network management. If you are managing
the Switch 2000 TR using Transcend Enterprise Man-
ager, this ID allows you to identify the unit in a stack.
Unit number 1 appears at the bottom of the stack.
Unit number 6 appears at the top of the stack.
Figure 4-11 TR Unit Setup Screen
Unit Name
Unit Name identifies the type of unit.
For example: Switch 2000 TR
Port Capacity
Indicates the number of ports on a unit.
Option Slot
Identifies any module options activated within the
unit.
Power Supply
Identifies the power source as follows:
■ Internal—Through the internal power supply of
the Switch 2000 TR.
■ External—Through a Redundant Power System
(RPS).