3Com TR - Manual (Page 82)

4-24 C HAPTER 4: C ONFIGURING WITH THE VT100 I NTERFACE
Initializing the Switch 2000 TR
The Switch 2000 TR VT100 interface allows you to
initialize the nonvolatile memory on the unit and
return to the factory defaults. Be aware that all con-
figuration parameters, database entries, and setting
will be erased and returned to the original factory-set
defaults.
You should only initialize the Switch 2000 TR if:
■ The current configuration scheme no longer suits
your network.
■ All other attempts to solve problems have not suc-
ceeded.
From the Switch 2000 TR Main Menu, proceed as fol-
lows:
1 Select INITIALIZE from the Main Menu.
The Initialization screen appears. See Figure 4-21.
Figure 4-21 Switch 2000 TR Initialization Screen
2 Select OK if you wish to initialize
3 Confirm operation by pressing [Enter].
Switch 2000 TR resets.
Refer to “Device Defaults in Chapter 2 for default
information and parameters.