I/o module switch 2000 tr – 3Com TR User Manual

Page 88

5-6

HAPTER

5: C

ONFIGURING

WITH

THE

LCD C

ONSOLE

Figure 5-2 I/O Module LCD Menus

To view the next level, press [Enter].

Press the [Down Arrow] until Switch 2000 TR >
Module appears.

Press [Enter]. STATUS > Module Type appears.

Press [Down Arrow] to scroll down through the I/O
Module menus.

Press [Enter] at any one of the following fields to view
the information described below. Press [Down Arrow]
to move through the circular menus.

■

Module Type—One of three module types:

■

FDDI

■

ATM

■

TR-in-FE

■

Module State—The current status of the module
(UP or DOWN).

■

HW Version—The current version of the hardware
PROM code.

■

SW Version—The current version of the software
code. (Not applicable for the TR-in-FE module.)

■

Boot SW Version—The current Boot software
version. (Not applicable for the TR-in-FE module.)

For more information about setting up the modules
refer to the documentation that came with them:

■

SuperStack II Switch 2000 TR ATM OC-3 Module
User Guide (Part Number #99041)

■

SuperStack II Switch 2000 TR FDDI Module User
Guide (Part Number #99048)

■

SuperStack II Switch 2000 TR TR-in-FE Module
User Guide (Part Number #99045)

> I/O Module

Switch 2000 TR

ENTER

Module Type
Module State
HW Version
SW Version
Boot SW Ver