5 static vlan, 1 static vlan status, Figure 32 vlan status – ZyXEL Communications GS-2724 User Manual
Page 88: Table 14 vlan status, 88 8.5 static vlan
Chapter 8 VLAN
GS-2724 User’s Guide
88
8.5 Static VLAN
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the
specified VID.
8.5.1 Static VLAN Status
See
for more information on Static VLAN. Click Advanced
Application > VLAN from the navigation panel to display the VLAN Status screen as shown
next.
Figure 32 VLAN Status
The following table describes the labels in this screen.
Table 14 VLAN Status
LABEL
DESCRIPTION
The Number of
VLAN
This is the number of VLANs configured on the Switch.
Index
This is the VLAN index number. Click on an index number to view more VLAN
details.
VID
This is the VLAN identification number that was configured in the Static VLAN
screen.
Elapsed Time
This field shows how long it has been since a normal VLAN was registered or a
static VLAN was set up.
Status
This field shows how this VLAN was added to the Switch.
dynamic: using GVRP
static: added as a permanent entry
other: added in another way, such as via Multicast VLAN Registration (MVR).
Change Pages Click Previous or Next to show the previous/next screen if all status information
cannot be seen in one screen.