ZyXEL Communications GS-2724 - Manual (Page 247)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
247
classifier Disables the classifier. Each
classifier has one rule.
If you disable a classifier you
cannot use policy rule related
information.
13
inactive Enables a classifier. 13
cluster Disables cluster management on
the Switch.
13
member address> Removes the cluster member. 13
dhcp relay Disables DHCP relay. 13
information Disables the relay agent
information option 82.
13
option System name is not appended to
option 82 information field.
13
dhcp server id> Disables DHCP server settings. 13
default-gateway Disables DHCP server default
gateway settings.
13
primary-dns Disables DHCP primary DNS
server settings.
13
secondary-dns Disables DHCP server
secondary DNS settings.
13
diffserv Disables the DiffServ settings. 13
https timeout Resets the session timeout to the
default of 300 seconds.
13
igmp-filtering Disables IGMP filtering on the
Switch.
13
profile Disables the specified IGMP
filtering profile.
13
profile
start-address
end-
address Clears the settings of the
specified IGMP filtering profile.
13
igmp-snooping Disables IGMP snooping. 13
ip Sets the management IP
address to the default value.
13
route
Removes a specified IP static
route.
13
route
inactive Enables a specified IP static
route.
13
lacp Disables the link aggregation
control protocol (dynamic
trunking) on the Switch.
13
logins Disables login access to the
specified name.
14
Table 90 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E