ZyXEL Communications GS-2724 - Manual (Page 242)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
242
38.11.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
Displays the status of the
specified VLAN.
13
vlan-stacking Displays VLAN stacking settings. 13
vlan1q gvrp Displays GVRP settings. 13
port-isolation Displays port isolation settings. 13
ssh <1|2>
<[user@]dest-ip>
Connects to an SSH server with
the specified SSH version.
13
[command ] Connects to an SSH server with
the specified SSH version and
addition commands to be
executed on the server.
13
traceroute
[in-band|out-of-
band|vlan id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet
takes to a device.
13
help Displays help information for this
command.
13
write memory Saves current configuration to the
configuration file the Switch is
currently using.
13
Saves current configuration to the
specified configuration file on the
Switch.
13
Table 89 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E
Table 90 Command Summary: Configuration Mode
COMMAND DESCRIPTION
PRIVILEG
E
admin-
password Changes the administrator
password.
14
bandwidth-
control Enables bandwidth control. 13
bcp-
transparenc
y Enables Bridge Control Protocol
(BCP) transparency.
13