ZyXEL Communications GS-2724 - Manual (Page 237)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
237
38.11.2 Enable Mode
The following table describes the commands available for Enable mode.
enable Accesses Enable (or privileged) mode. See
Section 38.11.2 on page 237 .
0
show ip Displays IP related information. 0
hardware-monitor Displays current hardware monitor information with
the specified temperature unit (Celsius C or
Fahrenheit F).
0
system-information Displays general system information. 0
ping Sends Ping request to an Ethernet device. 0
[vlan
]
[size <0-1472>]
[-t] Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
0
help Displays command help information. 0
traceroute Determines the path a packet takes to a device. 0
[vlan ]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>] Determines the path a packet takes to a device in a
VLAN.
0
help Displays command help information. 0
ssh <1|2> <[user@]dest-ip> Connects to an SSH server with the specified SSH
version.
0
Table 88 Command Summary: User Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E
Table 89 Command Summary: Enable Mode
COMMAND DESCRIPTION
PRIVILEG
E
baudrate
<1|2|3|4|5> Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5
(115200).
13
boot config Restarts the system with the
specified configuration file.
13
configure Accesses Configuration mode.
See Section 38.11.3 on page 242 .
13
copy running-config
tftp
Backs up running configuration to
the specified TFTP server with the
specified file name.
13
running-config
interface port-
channel
Clones (copies) the attributes
from the specified port to other
ports.
13