Table 58 igmp – ZyXEL Communications GS-2724 User Manual

Page 172

Chapter 25 IGMP

GS-2724 User’s Guide

172

The following table describes the labels in this screen.

Table 58 IGMP

LABEL

DESCRIPTION

Active

Select this check box to enable IGMP on the Switch.

Note: You cannot enable both IGMP snooping and IGMP at the same

time. Refer to the section on IGMP snooping.

Index

This field displays an index number of an entry.

Network

This field displays the IP domain configured on the Switch.
Refer to

for more information on configuring IP domains.

Version

Select an IGMP version from the drop-down list box. Choices are IGMP-v1, IGMP-v2,

IGMP-v3 and None.

Apply

Click Apply to save your changes to the Switch’s run-time memory. The Switch loses

these changes if it is turned off or loses power, so use the Save link on the top

navigation panel to save your changes to the non-volatile memory when you are done

configuring.

Cancel

Click Cancel to begin configuring the fields again.