ZyXEL Communications GS-2724 - Manual (Page 260)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
260
38.12 mvr Commands
The following table lists the mvr commands in configuration mode.
no fixed Sets fixed port(s) to normal
port(s).
13
forbidden list> Sets forbidden port(s) to normal
port(s).
13
inactive Enables the specified VLAN. 13
ip address address> Deletes the IP address and
subnet mask from this VLAN.
13
ip address default-
gateway Deletes the default gateway from
this VLAN.
13
untagged Specifies the port(s) you want to
tag all outgoing frames
transmitted with this VLAN
Group ID.
13
normal list> Specifies the port(s) to
dynamically join this VLAN group
using GVRP
13
untagged list> Specifies the port(s) you don’t
want to tag all outgoing frames
transmitted with this VLAN
Group ID.
13
Table 93 Command Summary: config-vlan Commands (continued)
COMMAND DESCRIPTION
PRIVILEG
E
Table 94 Command Summary: mvr Commands
COMMAND DESCRIPTION
PRIVILEG
E
mvr id> Enters the MVR (Multicast
VLAN Registration)
configuration mode.
13
exit Exist from the MVR
configuration mode.
13
group
start-address
end-address
Sets the multicast group range
for the MVR.
13
inactive Disables MVR settings. 13
mode compatible> Sets the MVR mode (dynamic
or compatible).
13
name Sets the MVR name for
identification purposes.
13
no group Disables all MVR group
settings.
13
group Disables the specified MVR
group setting.
13
inactive Enables MVR. 13