ZyXEL Communications GS-2724 - Manual (Page 238)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
238
running-config
interface port-
channel
[bandwidth-limit
....] Copies the specified attributes
from one port to other ports.
13
tftp config
file>
Restores configuration with the
specified filename from the
specified TFTP server to the
specified configuration file on the
router.
13
flash
Restores firmware via TFTP. 13
disable Exits Enable (or privileged) mode. 13
enable Accesses Enable (or privileged)
mode.
13
erase running-config Resets to the factory default
settings.
13
interface port-
channel list> [bandwidth-
limit...] Resets to the factory default
settings on a per port basis and
optionally on a per feature
configuration basis.
13
exit Exits Enable (or privileged) mode. 13
help Displays help information. 13
history Displays a list of command(s) that
you have previously executed.
13
igmp-flush Removes all IGMP information. 13
kick tcp Disconnects the specified TCP
session.
13
logout Exits Enable (or privileged) mode. 13
mac-flush Clears the MAC address table. 13
Removes all learned MAC
address on the specified port(s).
13
no logging Disables syslog logging. 13
ping
name> Sends Ping request to an Ethernet
device.
13
[vlan id>][..] Sends Ping request to an Ethernet
device in the specified VLAN(s).
13
reload config Restarts the system and use the
specified configuration file.
13
show classifier Displays all classifier related
information.
13
[name] Displays the specified classifier
related information.
13
cluster Displays cluster management
status.
13
Table 89 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E