ZyXEL Communications GS-2724 - Manual (Page 243)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
243
classifier <[packet-
format
<802.3untag|802.3t
ag| EtherIIuntag|
EtherIItag>]
[priority <0-7>]
[vlan id>][ethernet-type
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac mac-addr>]
[source-port
]
[destination-mac
]
[dscp <0-63> ]
[ip-protocol
num|tcp|udp|icmp|e
gp|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip ip-addr> [mask-
bits ]]
[source-socket
]
[destination-ip
[mask-bits bits>]]
[destination-
socket num>] [inactive]>
Configures a classifier. A
classifier groups traffic into data
flows according to specific
criteria such as the source
address, destination address,
source port number, destination
port number or incoming port
number.
13
help Displays help information for this
command.
13
cluster Enables clustering in the
specified VLAN group.
13
member address> password
Sets the cluster member. 13
name name> Sets a descriptive name for the
cluster.
13
rcommand address> Logs into the CLI of the specified
cluster member.
13
default-
management band> Specifies through which traffic
flow the Switch is to send
packets.
13
dhcp relay Enables DHCP relay. 13
Table 90 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E