Figure 24 port details, Table 7 port details – ZyXEL Communications GS-2724 User Manual
Page 67
Chapter 6 System Status and Port Statistics
GS-2724 User’s Guide
67
Figure 24 Port Details
The following table describes the labels in this screen.
Table 7 Port Details
LABEL
DESCRIPTION
Port Info
Port NO.
This field displays the port number you are viewing.
Name
This field displays the name of the port.
Link
This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M for
1000Mbps) and the duplex (F for full duplex or H for half duplex). It also shows the
cable type (Copper or Fiber).
Status
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port
for more information).
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it
displays STOP.
LACP
This field shows if LACP is enabled on this port or not.
TxPkts
This field shows the number of transmitted frames on this port
RxPkts
This field shows the number of received frames on this port
Errors
This field shows the number of received errors on this port.
Tx KB/s
This field shows the number kilobytes per second transmitted on this port.
Rx KB/s
This field shows the number of kilobytes per second received on this port.