ZyXEL Communications GS-2724 - Manual (Page 256)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
256
frame-type
ged> Choose to accept both tagged and
untagged incoming frames, just
tagged incoming frames or just
untagged incoming frames on a
port.
13
ge-spq Enables strict priority queuing
starting with the specified queue
and subsequent higher queues on
the Gigabit ports.
13
gvrp Enables this function to permit
VLAN groups beyond the local
switch.
13
help Displays a description of the
interface port-channel commands.
13
igmp-filtering profile Applies the specified IGMP
filtering profile.
13
igmp-group-
limited Enables the IGMP group limiting
feature.
13
number Sets the maximum number IGMP
groups allowed.
13
igmp-immediate-
leave Enables the IGMP immediate
leave function.
13
igmp-querier-mode
Sets the IGMP query mode for the
port.
13
inactive Disables the specified port(s) on
the Switch.
13
ingress-check Enables the device to discard
incoming frames for VLANs that
are not included in a port member
set.
13
intrusion-lock Enables intrusion lock on the
port(s) and a port cannot be
connected again after you
disconnected the cable.
13
mirror Enables port mirroring in the
interface.
13
dir egress|both> Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
13
multicast-limit Enables the port(s) multicast limit. 13
Sets how many multicast packets
the port(s) receives per second.
13
name string> Sets a name for the port(s). Enter
a descriptive name (up to nine
printable ASCII characters).
13
Table 91 interface port-channel Commands (continued)
COMMAND DESCRIPTION
PRIVILEG
E