ZyXEL Communications GS-2724 User Manual
Page 257

Chapter 38 Introducing Commands
GS-2724 User’s Guide
257
no bandwidth-limit
Disables bandwidth limit on the
port(s).
13
bandwidth-limit
Disables cir bandwidth limits on
the port(s).
13
bandwidth-limit
Disables pir bandwidth limits on
the port(s).
13
bandwidth-limit
Disables egress bandwidth limits
on the port(s).
13
broadcast-limit
Disables broadcast storm control
limit on the port(s).
13
diffserv
Disables DiffServ on the port(s).
13
dlf-limit
Disables destination lookup failure
(DLF) on the Switch.
13
egress-set
Disables the egress port setting.
13
flow-control
Disables flow control on the
port(s).
13
ge-spq
Disables strict priority queuing on
the Gigabit ports.
13
gvrp
Disable GVRP on the port(s).
13
igmp-filtering
profile
Disables IGMP filtering.
13
igmp-group-limit
Disables IGMP group limitation.
13
igmp-immediate-
leave
Disables the IGMP immidiate
leave function.
13
inactive
Enables the port(s) on the Switch.
13
ingress-check
Disables ingress checking on the
port(s).
13
intrusion-lock
Disables intrusion-lock on a port
so that a port can be connected
again after you disconnected the
cable.
13
mirror
Disables port mirroring on the
port(s).
13
multicast-limit
Disables multicast limit on the
port(s).
13
vlan-trunking
Disables VLAN trunking on the
port(s).
13
pvid
The default PVID is VLAN 1 for all
ports. Sets a PVID in the range 1
to 4094 for the specified interface.
13
qos
priority <0 .. 7> Sets the quality of service priority
for an interface.
13
Table 91 interface port-channel Commands (continued)
COMMAND
DESCRIPTION
PRIVILEG
E