ZyXEL Communications GS-2724 - Manual (Page 253)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
253
service-
control ftp number> Allows FTP access on the
specified service port.
13
http number> Allows HTTP access on the
specified service port and
defines the timeout period.
13
https number> Allows HTTPS access on the
specified service port.
13
icmp Allows ICMP management
packets.
13
snmp Allows SNMP management. 13
ssh number> Allows SSH access on the
specified service port.
13
telnet number> Allows Telnet access on the
specified service port.
13
snmp-server [contact contact>]
[location location>] Sets the geographic location and
the name of the person in charge
of this Switch.
13
get-community
Sets the get community. 13
set-community
Sets the set community. 13
trap-community
Sets the trap community. 13
trap-destination
Sets the IP addresses of up to
four stations to send your SNMP
traps to.
13
spanning-
tree Enables STP on the Switch. 13
Enables STP on a specified port. 13
path-
cost <1-65535> Sets the STP path cost for a
specified port.
13
priority <0-255> Sets the priority for a specified
port.
13
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-
30> Sets Hello Time, Maximum Age
and Forward Delay.
13
help Displays help information. 13
priority <0-61440> Sets the bridge priority of the
Switch.
13
ssh known-hosts
ip> <1024|ssh-
rsa|ssh-dsa>
Adds a remote host to which the
Switch can access using SSH
service.
13
storm-
control Enables broadcast storm control
on the Switch.
13
Table 90 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E