ZyXEL Communications GS-2724 - Manual (Page 252)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
252
reauth-period
Specifies how often a client has
to re-enter the username and
password to stay connected to
the specified port(s).
13
port-
security Enables port security on the
device.
13
Enables port security on the
specified port(s).
13
learn inactive Disables MAC address learning
on the specified port(s).
13
address-limit
Limits the number of (dynamic)
MAC addresses that may be
learned on a port.
13
MAC-freeze Adds learned MAC addresses to
the static MAC table and stops
learning any more MAC
addresses.
13
queue priority <0-7>
level <0-7> Sets the priority level-to-physical
queue mapping.
13
radius-
server host Specifies the IP address of
RADIUS server 1 or RADIUS
server 2 (index =1 or index =2).
13
[auth-port
number>] [key
] Sets the port number and key of
the external RADIUS server.
13
timeout <1-1000> Specifies the RADIUS server
timeout value.
13
mode -robin> Specifies the mode for RADIUS
server selection.
13
remote-
management start-addr
end-addr
service
icmp|snmp> Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the Switch.
13
router igmp Enables and enters the IGMP
configuration mode.
13
exit Leaves the IGMP configuration
mode.
13
non-querier Sets the Switch into a non-
querier mode. It will not send
igmp query messages.
13
no non-querier Disables non-querier mode on
the Switch.
13
rip Enables and enters the RIP
configuration mode.
13
exit Leaves the RIP configuration
mode.
13
Table 90 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E