8 getting help – ZyXEL Communications GS-2724 User Manual
Page 233

Chapter 38 Introducing Commands
GS-2724 User’s Guide
233
Enter
exit
to quit from the current mode or enter
logout
to exit the command interpreter.
38.8 Getting Help
The system includes a help facility to provide you with the following information about the
commands:
• List of available commands under a command group.
• Detailed descriptions of the commands.
Command modes that follow are sub-modes of the config mode and can only be accessed from within the config
mode.
Config-vlan
This is a sub-mode of the config mode
and allows you to configure VLAN
settings.
Type
vlan
followed
by a number (between
1 to 4094). For
example,
vlan 10
to
configure settings for
VLAN 10.
sysname(config-vlan)#
Config-interface
This is a sub-mode of the config mode
and allows you to configure port
related settings.
Type
interface
port-channel
followed by a port
number. For example,
i
nterface port-
channel 8
to
configure port 8 on the
Switch.
sysname(config-
interface)#
Config-mvr
This is a sub-mode of the config mode
and allows you to configure multicast
VLAN settings.
To enter
MVR
mode,
enter
mvr
followed by
a VLAN ID (between 1
and 4094). For
example, enter
mvr 2
to configure multicast
settings on VLAN 2.
sysname(config-mvr)#
Table 87 Command Interpreter Mode Summary (continued)
MODE
.
DESCRIPTION
HOW TO LOGIN/
ACCESS
PROMPT