ZyXEL Communications GS-2724 - Manual (Page 239)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
239
candidates Displays cluster candidate
information.
13
member Displays the MAC address of the
cluster member(s).
13
member config Displays the configuration of the
cluster member(s).
13
member mac addr> Displays the status of the cluster
member(s).
13
dhcp relay Displays DHCP relay settings. 13
server Displays DHCP server settings. 13
server Displays DHCP server settings in
a specified VLAN.
13
diffserv Displays general DiffServ settings. 13
garp Displays GARP information. 13
hardware-monitor Displays current hardware monitor
information with the specified
temperature unit (Celsius C or
Fahrenheit F).
13
https Displays the HTTPS information. 13
certificate Displays the HTTPS certificates. 13
key Displays the HTTPS key. 13
session Displays current HTTPS
session(s).
13
timeout Displays the HTTPS session
timeout.
13
igmp-filtering profile [name] Displays IGMP filtering profile
settings.
13
igmp-snooping Displays global IGMP snooping
settings.
13
interface number> Displays current interface status. 13
interfaces list> Displays current interfaces status. 13
interfaces config
Displays current interface
configuration.
13
bandwidth-control Displays bandwidth control
settings.
13
bstorm-control Displays broadcast storm control
settings.
13
egress Displays outgoing port
information.
13
igmp-filtering Displays IGMP filtering settings. 13
igmp-group-
limited Displays the IGMP group limit. 13
Table 89 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E