ZyXEL Communications GS-2724 User Manual
Page 245
Chapter 38 Introducing Commands
GS-2724 User’s Guide
245
host-timeout
<1-16711450>
Sets the host timeout value.
13
leave-timeout
<1-16711450>
Sets the leave timeout value
13
unknown-multicast-
frame
Sets how to treat traffic from
unknown multicast group.
13
reserved-
multicast-group
Sets how to treat traffic
belonging to reserved multicast
groups.
13
interface
port-channel
Enables a port or a list of ports
for configuration. See
for more
details.
13
route-domain
Enables a routing domain for
configuration. See
for more
details.
13
ip address
Sets the IP address and subnet
mask of the out-of-band
management port.
13
default-gateway
Sets the default gateway’s IP
address for the out-of-band
management port.
13
name-server
Sets the IP address of a domain
name server.
13
route
Creates a static route.
13
[metric
[inactive]
Sets the metric of a static route
or deactivates a static route.
13
lacp
Enables Link Aggregation
Control Protocol (LACP).
13
system-priority
<1-65535>
Sets the priority of an active port
using LACP.
13
loginPreced
ence
RADIUSOnly>
Select which database the
Switch should use (first) to
authenticate a user.
13
logins username
password
Configures up to four read-only
login accounts.
14
username
privilege <0-
14>
Assigns a privilege level to user
accounts.
14
logout
Exits from the CLI.
13
mac-aging-
time
<10-3000>
Sets learned MAC aging time.
13
Table 90 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION
PRIVILEG
E