Yamaha WC42260 - Manual (Page 42)

42
Chapter 2—Control Surface & Rear Panel
DM2000 Version 2—Owner’s Manual
MONITOR Section
The various subsections of the MONITOR section are explained below.
STUDIO
A MONITOR DISPLAY button
This button is used to select the following pages: Solo Setting, Control Room Setup, Talk-
back Setup, Surround Monitor, Surround Monitor Setup, Surround Monitor Patch, and
Surround Monitor Library. See “Configuring Solo” on page 143, “Control Room Monitor-
ing” on page 158 “Using Talkback & Slate” on page 163, and “Surround Monitoring” on
page 160 respectively for more information.
B CONTROL ROOM button
This button selects the Control Room Monitor signal as the Studio Monitor signal source.
Its indicator lights up when this source is selected. See “Studio Monitoring” on page 159 for
more information.
C STEREO button
This button selects the Stereo Out signal as the Studio Monitor signal source. Its indicator
lights up when this source is selected. See “Studio Monitoring” on page 159 for more infor-
mation.
D AUX 11 button
This button selects Aux Send #11 as the Studio Monitor signal source. Its indicator lights up
when this source is selected. See “Studio Monitoring” on page 159 for more information.
E AUX 12 button
This button selects Aux Send #12 as the Studio Monitor signal source. Its indicator lights up
when this source is selected. See “Studio Monitoring” on page 159 for more information.
SOLO
A SOLO indicator
This indicator flashes when one or more Channels are soloed, indicating that the Solo func-
tion is active. See “Soloing Channels” on page 142 for more information.
B SOLO CONTRAST control
This control is used to set the level balance between soloed Input Channels and the cur-
rently selected CONTROL ROOM source. It has no effect on soloed Output Channels. See
“Soloing Channels” on page 142 for more information.
C CLEAR button
This button can be used to unsolo all soloed Channels. See “Soloing Channels” on page 142
for more information.
STUDIO
CONTROL
ROOM
STEREO
AUX 11 AUX 12
CONTROL ROOM
SOLO
CLEAR
SOLO CONTRAST
2TR D1 2TR A1
2TR D2 2TR A2
2TR D3 STEREO
ASSIGN 1 ASSIGN 2
ASSIGN 1 ASSIGN 2
DIMMER
SMALL
MONO
SURROUND
MONITOR LEVEL
SLATE
TALKBACK
MONITOR
CONTROL ROOM LEVEL
BUS
TALKBACK
DISPLAY
STEREO
SURROUND
10 0
STUDIO
CONTROL
ROOM
STEREO
AUX 11 AUX 12
MONITOR
DISPLAY
1
2
4
3
5
SOLO
CLEAR
SOLO CONTRAST
1
2
3