Muting matrix sends (on/off), Matrix send pages, Using the encoders – Yamaha WC42260 User Manual
Page 122: Chapter 11—matrix sends
122
Chapter 11—Matrix Sends
DM2000 Version 2—Owner’s Manual
Using the Encoders
Stereo Out Matrix Sends cannot be set using the Encoders.
1
Press the LAYER [MASTER] button to select the Master Layer.
2
Press the ENCODER MODE [AUX/MTRX] button to select the Aux/Mtrx
Encoder mode.
3
Use the MATRIX SELECT [1–4] buttons to select Matrix Sends 1–4.
4
Use Encoders 1–20 to set the Matrix Send levels.
Encoders 21–24 are inactive because Matrix Send Masters do not feature Matrix
Send controls.
Muting Matrix Sends (ON/OFF)
1
Press the LAYER [MASTER] button to select the Master Layer.
2
Use [SEL] buttons 1–20 to select the Bus Outs and Aux Sends, and use the
STEREO [SEL] button to select the Stereo Out.
The Matrix Sends for the left and right channels of the Stereo Out can be muted individu-
ally. Use the STEREO [SEL] button to select the left and right channels.
3
Use the SELECTED CHANNEL AUX/MATRIX SEND [ON] buttons to turn the
Matrix Sends on the selected Output Channel on and off.
Matrix Send Pages
Matrix Send parameters for the Bus Outs, Aux Sends, and the Stereo Out can be viewed and
set on the Matrix Send page.
1
Use the MATRIX SELECT [DISPLAY] button to select the Matrix Send page.
2
Use the Matrix SELECT [1–4] buttons to select Matrix Sends 1–4.
3
Use the cursor buttons to select the Output Channel Matrix Send controls.
If the Master Layer is selected, [SEL] buttons 1–20 can also be used to select Output Channels.
AUX / MATRIX SEND
LEVEL
ON
LEVEL
ON
LEVEL
ON
LEVEL
ON
AUX
1
/ MATRIX
1
AUX
5
AUX
9
AUX
2
/ MATRIX
2
AUX
6
AUX
10
AUX
3
/ MATRIX
3
AUX
7
AUX
11
AUX
4
/ MATRIX
4
AUX
8
AUX
12
BANK
DISPLAY