Mono delay, Stereo delay, Mod. delay – Yamaha WC42260 User Manual
Page 311: Effects parameters, One input, one output basic repeat delay, Two input, two output basic stereo delay
Effects Parameters
311
DM2000—Owner’s Manual
MONO DELAY
One input, one output basic repeat delay.
STEREO DELAY
Two input, two output basic stereo delay.
MOD. DELAY
One input, two output basic repeat delay with modulation.
Parameter
Range
Description
DELAY
0.0–2730.0 ms
Delay time
FB. GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback, minus val-
ues for reverse-phase feedback)
HI. RATIO
0.1–1.0
High-frequency feedback ratio
HPF
THRU, 21.2 Hz–8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz, THRU
Low-pass filter cutoff frequency
SYNC
OFF/ON
Tempo parameter sync on/off
NOTE
1
1.
(Max. value depends on tempo setting)
Used in conjunction with TEMPO to determine DELAY
Parameter
Range
Description
DELAY L
0.0–1350.0 ms
Left channel delay time
DELAY R
0.0–1350.0 ms
Right channel delay time
FB. G L
–99 to +99%
Left channel feedback (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
FB. G R
–99 to +99%
Right channel feedback (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
HI. RATIO
0.1–1.0
High-frequency feedback ratio
HPF
THRU, 21.2 Hz–8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz, THRU
Low-pass filter cutoff frequency
SYNC
OFF/ON
Tempo parameter sync on/off
NOTE L
1
1.
(Maximum value depends on the tempo setting)
Used in conjunction with TEMPO to determine left channel DELAY
NOTE R
1
Used in conjunction with TEMPO to determine right channel DELAY
Parameter
Range
Description
DELAY
0.0–2725.0 ms
Delay time
FB. GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback, minus val-
ues for reverse-phase feedback)
HI. RATIO
0.1–1.0
High-frequency feedback ratio
FREQ.
0.05–40.00 Hz
Modulation speed
DEPTH
0–100%
Modulation depth
WAVE
Sine/Tri
Modulation waveform
HPF
THRU, 21.2 Hz–8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz, THRU
Low-pass filter cutoff frequency
SYNC
OFF/ON
Tempo parameter sync on/off
DLY.NOTE
1
1.
(Maximum value depends on the tempo
setting)
Used in conjunction with TEMPO to determine DELAY
MOD.NOTE
2
2.
Used in conjunction with TEMPO to determine FREQ