Yamaha WC42260 - Manual (Page 233)

Control Surface Operation with the Pro Tools Remote Layer
233
DM2000 Version 2—Owner’s Manual
TRACK ARMING Section
[1–24] (REC/RDY) buttons
These buttons are used to arm Pro Tools channels for recording. The button indicators of
channels that are armed flash. The button indicators of armed channels light continuously
when recording starts.
[MASTER] (REC/RDY ALL) button
This button is used to arm all Pro Tools channels for recording. The button indicators of all
channels flash when this button is pressed. All channels can be disarmed by pressing it
again, in which case all button indicators go out. The number of channels that can be armed
depends on the number of recordable tracks in the current Pro Tools session.
The following shortcuts apply.
AUTOMIX Section
[DISPLAY] (AUTO STATUS) button
When this button is pressed, the Automation modes of all channels are displayed on the
channel strip displays. See “Viewing the Automation Mode” on page 250 for more informa-
tion.
[ENABLE] (SUSPEND) button
This button is used to suspend all automation recording and playback operations. Its but-
ton indicator flashes while automation is suspended. Level and other channel strip settings
are left as they are while automation is suspended.
To do this... Do this!
Arm all channels (same as [MASTER]
(REC/RDY ALL) button
USER DEFINED KEYS [5] + TRACK ARMING [1–24]
Arm all selected channels
USER DEFINED KEYS [5] + USER DEFINED KEYS [4] + TRACK
ARMING [1–24]
TRACK ARMING
MASTER
(REC/RDY ALL)
1 2 4 5 6 7 8
9 10 12 13 14 15 16
21 22 23 24 17 18 20 19
11
3
OVERWRITE
FADER ON PAN EQ AUX AUX
ON
(FADER)
(AUTO STATUS)
(MUTE) PAN (PLUG-IN) (SEND) (SEND
MUTE)
ENABLE REC ABORT /
UNDO
AUTO-
REC
RETURN RELATIVE TOUCH
SENSE
DISPLAY
SUSPEND WRITE TOUCH LATCH READ TRIM OFF
AUTOMIX