Yamaha WC42260 - Manual (Page 102)

102
Chapter 7—Input Channels
DM2000 Version 2—Owner’s Manual
Sending Input Channels to Aux Sends
Input Channel signals can be sent to Aux Sends 1–12. See “Setting Aux Send Levels” on
page 111, “Muting Aux Sends (ON/OFF)” on page 112, and “Pre-Fader or Post-Fader Aux
Sends” on page 111.
Soloing Input Channels
Input Channels can be soloed. See page 142 for more information.
Direct Outs
Each Input Channel features a Direct Out, which can be patched to the Slot Outputs, Omni
Outs, or the 2TR Digital Outputs. Direct Out signals can be sourced pre-EQ, pre-fader, or
post-fader. See “Patching Direct Outs” on page 81 and “Routing Input Channels” on
page 93 for more information.
Pairing Input Channels
Horizontal or vertical Input Channel partners can be paired for stereo operation. See “Pair-
ing Channels” on page 144 for more information.
Viewing Input Channel Settings
Parameter and fader settings for each Input Channel can be viewed on the View pages. See
“Viewing Channel Parameter Settings” on page 150 and “Viewing Channel Fader Settings”
on page 151 for more information.
Copying Input Channel Settings
Input Channel settings can be copied to other Input Channels by using the Channel Copy
function. See “Copying Channel Settings” on page 155 for more information.
Naming Input Channels
Input Channels can be named for easy identification. See “Naming Channels” on page 156
for more information.