Yamaha WC42260 - Manual (Page 275)

Setting Preferences
275
DM2000 Version 2—Owner’s Manual
Auto AUX/MATRIX Display: When this preference is on, the Aux View pages appear
automatically when a SELECTED CHANNEL AUX/MATRIX SEND control is operated
while an Input Channel is selected (see page 114), and the Matrix View page appears auto-
matically when a SELECTED CHANNEL AUX/MATRIX SEND control is operated while a
Bus Out, Aux Send, or the Stereo Out is selected (see page 124).
Auto DYNAMICS Display: When this preference is on, the Gate Edit page appears auto-
matically when a gate control in the SELECTED CHANNEL DYNAMICS section is oper-
ated (see page 85), and the Comp Edit page appears automatically when a Compressor
control in the SELECTED CHANNEL DYNAMICS section is operated (see page 137).
Auto PAN/SURROUND Display: When this preference is on and Input Channels have
been selected, the Pan pages appears automatically when a control in the SELECTED
CHANNEL PAN/SURROUND section is operated (see page 96). Similarly, when a Sur-
round Pan mode other than Stereo is selected, the Input Channel Surround Edit page
appears automatically when the Joystick is operated (see page 100). Also, when Stereo or
Matrix is selected, the Fader View page appears automatically when the Pan controls are
operated.
Auto EQUALIZER Display: When this preference is on, the EQ Edit page appears auto-
matically when a control in the SELECTED CHANNEL EQUALIZER section is operated
(see page 134).
Auto SOLO Display: When this option is on, the Solo Setup page appears automatically
when an channel is soloed (see page 143).
Auto WORD CLOCK Display: When this preference is on, the Word Clock Select page
appears automatically if the currently selected external wordclock source fails (see page 67).
Auto Channel Select: When this preference is on, channels can be selected by moving
the corresponding fader or Encoder, or by turning on the corresponding [AUTO], [SOLO],
or [ON] button.
Store Confirmation: When this preference is on, the Title Edit window appears when
you store a Scene (page 187) or library memory (page 165). However, when you store an
Automix library memory, the Title Edit window appears regardless of whether this prefer-
ence is set to on or off.
Recall Confirmation: When this preference is on, a confirmation message appears when
you recall a Scene (page 187) or library memory (page 165).
Patch Confirmation: When this preference is on, a confirmation message appears when
you edit the Input and Output Patches (see page 77).
Pair Confirmation: When this preference is on, a confirmation message appears when
you pair channels using the [SEL] buttons.
Nominal Pan: When this preference is on, left/odd and right/even signals will be at nom-
inal level when Input Channel, Bus to Stereo, Bus to Matrix, or Aux to Matrix signals are
panned hard left or hard right, and at –3 dB when panned center. When this preference is
off, signals panned hard left or hard right will be at 3 dB, and at nominal level when panned
center. In Surround mode, this preference setting is used for the signal of any Surround Pan
channel that is fully panned.
Fast Meter Fall Time: When this preference is on, the level meters fall quicker.
TC Drop Warning: When this preference is on, a warning message appears if a dropout
is detected in the incoming timecode.
DIO Warning: When this preference is on, a warning message appears if any errors are
detected in digital audio signals received by the Slot Inputs or 2TR Digital Inputs.
MIDI Warning: When this preference is on, a warning message appears if any errors are
detected in the incoming MIDI messages.
Initial Data Nominal: When this preference is on, Input Channel faders are set to nom-
inal when Scene #0 is recalled.